A SERVICE OF

logo

Open as PDF
next previous
4. Push the latch plate into the buckle until it clicks.
Position the release button on the buckle so that
the safety belt could be quickly unbuckled if
necessary.
5. Pull the rest of the shoulder belt all the way out of
the retractor to set the lock.
6. If the vehicle does not have a rear seat and the
child restraint manufacturer recommends using a
top tether anchor, attach the top tether to the top
tether anchor. Refer to the instructions that came
with the child restraint and to Lower Anchors and
Tethers for Children (LATCH)
on page 2‑46
.
2-64