4
50061011 Chevy Impala SS
A Division of KW automotive North America, Inc
Installation Instructions LamboStyleDoors
(The instructions are to be used as a reference only. Please repeat steps for both doors.)
Pre-installation check list:
•Battery disconnected •Front bumper removal •Front fender removal
•Vehicle must be accident free •Vehicle must have inner fender cover
Preparations:
(Disassemble parts according to the vehicle manufacturers’ specifications)
•
Disassemble the door stopper
• Disconnect the wire harness between the chassis and the door (remove the harness from the door interior
when necessary)
• Disassemble the door. For this procedure, remove the pin between the hinges.
• Modify the hinges at the A-pillar and on the door (please see enclosure “modifying the hinges”.
• Extend the factory door wire harness with the enclosed wire harness extension kit.
(See enclosed “wire harness extension”.
• Modify the fender
(See enclosed “modifying the fender”.
• Relocate the door lock vacuum case (when necessary).
(e.g. from the passenger’s side inner fender to the engine compartment)
• Modify the windshield washer reservoir (when necessary).
(see enclosed “modifying the windshield washer reservoir”)
