A SERVICE OF

logo

Installation Instuctions PPD-Series
7
ASSEMBLE CART (CONT’D)
6. Adjust tilt head (70) to desired tilt by slightly loosen-
ing four 1/4-20x5/8” button head cap screws (130)
securing tilt head spreaders (90), adjust tilt head to
desired angle (0º to 7-1/2º), and tighten four
1/4-20x5/8” button head cap screws (130).
See Figure 5).
7. Using six 5/16-18X3/4” screws (140), secure the dual
screen mounting bracket (80) to the tilt mounting
head (70) (see Figure 6).
Dual
Loosen Screws
Loosen Screws
Tilt Head Spreader
0 to 7.5 Degrees
(80)
Mounting
Bracket
(90)
Tilt
Mounting
Head
(70)
Screen
5/16-18 Screws (140)
Tilt Mounting
Dual Screen
Mounting Bracket (80)
Head (70)
Figure 5. Adjust Tilt Mounting Head
Figure 6. Attach Dual Screen Mounting Bracket to Mounting Head