A SERVICE OF

logo

Cisco Catalyst Blade Switch 3030 Getting Started Guide
Installing the Switch Module in the Server Chassis
1-10
Cisco Catalyst Blade Switch 3030 Getting Started Guide
78-17052-01
Figure 4 Connecting through the Switch Module Console Port
Step 2
Start the terminal emulation session so you will be able to see the output display
from the power-on self-test (POST). The terminal-emulation software—a PC
application such as Hyperterminal or ProcommPlus—makes communication
between the switch and your PC or terminal possible.
Configure the baud rate and character format of the PC or terminal to match these
console port default characteristics:
9600 baud
8 data bits
1 stop bit
No parity
None (flow control)
Step 3 Go to “Waiting for POST to Complete” section on page 1-13 to finish configuring
the switch module.
11x
12x
13x
14x
15x
16x
C
onsole
11x
12x
13x
14x
15x
16x
C
O
N