A SERVICE OF

logo

Installation 2-5
Multi-Cabinet Installations (IPX 16/32)
Figure 2-4 Cabinets Joined at the Top
Step 2
Insert the mounting bracket between the underside of the cabinet and the lock nut so that
the screw supporting the cabinet foot slides into the L shaped recess.
Step 3 Rotate the mounting bracket towards the second cabinet so that the straight recess slides
around the screw in the second cabinet (Figure 2-6).
Step 4 Tighten the lock nuts to secure the mounting bracket in place (Figure 2-7).
Step 5 Perform this procedure for both the front and the rear of the cabinet.
Figure 2-5 Bottom Mounting Bracket (IPX 16/32)
Top mounting
bracket
Securing
screw
IPX cabinet 1 IPX cabinet 2
H8100
IPX
cabinet 1
IPX
cabinet 2
Bottom
mounting bracket Insert first
Insert second
H8101