5-53
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 5 PNNI Commands
dsppnni-bn-path
dsppnni-bn-path
Display PNNI Border Node Paths—display the PNNI border node paths.
This debugging command displays the border node-to-border node paths of the immediate
child-peer-group of the logical group nodes (LGN).
Note The command applies to multi-peer groups only.
Cards on Which This Command Runs
PXM45
Syntax
dsppnni-bn-path <node-index>
Syntax Description
Contents of the dsppnni-bn-path Output
node-index The node index indicates the relative level of the logical node within the hierarchy on
the switch. The range is 1–10, and the lowest level is 1.
Range: 1–10
Default: none
node index The range is 1–10.
source node IDB index The node identifier within the internal data base (IDB).
Range: 1–2147483648
source node ID The node ID of the source.
destination node IDB index The node ID of each destination node.
