To use any of the reset functions, press the Menu button
˙
to make the Main Menu appear. Press
the
¤
Menu Control button eight times, and the System Reset will be highlighted. Press the
›
Menu Control button to enter the System Reset menu (Figure OSD-32).
Figure OSD-32
Press the
¤
Menu Control button to select the reset mode you wish to use. Note first, however,
the wording on the bottom line. This line, System Edit, allows you to “lock” the system so that
no reset mode may be accidentally invoked. Locking and unlocking the reset modes is accomplished
simply by pressing the
¤
Menu Control button to highlight the System Edit line, and press-
ing either the
‹
or
›
Menu Control buttons to change from one state to the other. When the line
reads System Edit LOCKED, it is not possible to highlight, or select, any choice but System
Edit (to unlock, if desired), or the top line, which indicates how to return to the Main Menu.
When the bottom line reads System Edit UNLOCKED, you may highlight any of the reset
modes, then press the
›
Menu Control button to go to the next screen which is simply a warning
that if you now press MENU you will lose all information you have programmed in that part of the
5.0’s setup, and will revert to factory-set default data. (The fourth choice, Reset System, resets all
user-input data to defaults.) These warning screens are illustrated in Figures OSD-33, OSD-34,
OSD-35 and OSD-36.
Figure OSD-33 Figure OSD-34
Figure OSD-35 Figure OSD-36
!!! WARNING !!!
Resetting System
will erase ALL
user Modifications
to this unit
Press MENU to RESET
Press CANCEL to Exit
!!! WARNING !!!
Resetting Calib Levels
will set Speaker Setup
and Calibration Levels
to Factory Default
Values
Press MENU to RESET
Press CANCEL to Exit
!!! WARNING !!!
Resetting Programs
will erase all user
Modifications to
any and all Programs
Press MENU to RESET
Press CANCEL to Exit
!!! WARNING !!!
Resetting Modes
will erase all user
Modifications to any
and all Surround Modes
Press MENU to RESET
Press CANCEL to Exit
System Reset
< Main Menu <
Reset Modes >
Reset Programs >
Reset Calib Params >
Reset Systems >
System Edit UNLOCKED
60
Advanced Features
