Overview
OverviewOverview
Overview
Introduction
IntroductionIntroduction
Introduction
This guide explains how to install software from the installation CD onto your server
and how to configure the resources resident on the server to support Compaq
T1500 Windows-Based Terminals for this software release.
How to Use This Guide
How to Use This GuideHow to Use This Guide
How to Use This Guide
For full access to all the terminal resources, you will need to plan and configure
your server setup as explained in Chapter 1 of this guide.
If you only want to verify basic operation of the terminal using local boot, go directly
to the quick-start procedure in Appendix A. However, you will have only limited
access to the terminal resources.
Terminal setup information is available from help files resident on the terminals and
complete instructions are available on line after terminal-server communication is
established.
References
ReferencesReferences
References
The following Requests for Comments (RFCs) should be reviewed:
Note
NoteNote
Note
RFCs are freely available through the World-Wide
Web. They can be accessed from sites such as:
http://
www.cis.ohio-state.edu/hypertext/information/rfc.html
