36
Shooting Features
• Press the d button to select On or Off in HDR to enable or disable the high
dynamic range (HDR) function based on the type of image you want to take.
• Off (default setting): The flash fires to prevent the subject from being hidden in
shadow.
- When the shutter-release button is pressed all the way down, one image is
captured.
• On: Use when taking images with very bright and dark areas in the same frame.
- When the shutter-release button is pressed all the way, the camera shoots
images continuously at high speed, and saves the following two images.
- A non-HDR composite image
- An HDR composite image in which the loss of details in highlights or shadows
is minimized
- If there is only enough memory to save one image, an image processed by D-
Lighting (A69) at the time of shooting, in which dark areas of the image are
corrected, is the only image saved.
- Once the shutter-release button is pressed all the way, hold the camera still until
a still image is displayed. After taking an image, do not turn the camera off before
the monitor switches to the shooting screen.
- The angle of view (i.e., the area visible in the frame) seen in the saved image is
narrower than that seen in the monitor at the time of shooting.
• While the shutter-release button is held all the way down, the camera shoots up to
about 5 images continuously at a rate of about 6.7 fps (when image mode is set to
P 4608×3456).
• The frame rate for continuous shooting may vary depending upon the current
image mode setting, the memory card used, or shooting condition.
• Focus, exposure, and hue are fixed at the values determined with the first image in
each series.
• To avoid the effects of camera shake, hold the camera steady. Set Photo VR to Off
in the setup menu (A78) when using a tripod to stabilize the camera during
shooting.
o Backlighting
y M d Sports
y M f Party/indoor
