
,_ WARNING: Never feed wood with yourhandswhen
ma_dngany non-throughcut suchas rabbets or
dadoes. To avoidpersonalinjury, aJways usepush
blocks, push sticks,and featherboards.
• When the cut is made, turn the saw OFF. Wait for the
blade to come to a complete stop before removingthe
workpieca.
• Unplugthe saw.
• Lowerthe blade and removethe screwholding the
throat plate in place. Remove thethroatplate.
• Raise thesaw b(ade.
• Push thebeveilockingleveeto theright.Rotatetheheight
adjustinghandwheelunUithebevelindicatorshowsa 30+
angle. Push the bevel Iocldng leveesecurelyto the left
whileholdingthe heightadjustinghandwheelto lockthe
angle. Reinsta_the b_adeguardassembly.
• Retightenthe nuts at the base oftherivingknife.Check
rivingkni_'ealignmentto theblade and adjustshimsif
necessary.
• Move the bevel locking[everto therightand rotatethe
blade back to 90%Push the leverto the left to lock the
angle.
• Lowerthe blade, insertthe throat plate,then securely
tighten the throatplate screw.
NON-THROUGHCUT
BLADE
GUARD
REMOVED
MAKING A DADO CUT
See _gurs 50.
An optior_l _Ladothroat plate _sreq_drsdforthis pro-
cadurs (max. dadowirtth_3/16 in.). See the Accessorles
sectionof this manua! and checkwith yournearestSears
retsil.Do not usebladesrated lessthan thespeed of this
tooL
NOTE: Thissaw cannotbeused tomake a bevel dado
CUt.
• Unplugthe saw.
• Remove the bladeguard aseembly.
• Ratlghtanthe two hexnuts.
• Removethesaw blade.
• Remove_heinnerblade washer and boththe sma_and
_eegespacers.
• Add the smellspacer thenthe innerb]adewasher to
the bladesarbor.
• Mount the dado blade, usingthe blade and chippers
appropriatefor the desired width of cut.
• Reinstallthe arbor nut.
• Make sure thearbor nut Isfullyengaged and the
eebor extends at loast one fiJll_rsad past a sacurely
tightened arbornut.
_k WARNING; Alwaysput all spacersin proper
locationwhen changingback to saw blade. Failure
to do somay resultinpossibleinjuryand damage to
the tool.
A WARNING: Akvays usepushblocks, pushstlc_, or
fsatharbcardswhen makingdado cutstoavoidthe
risk of seriousinjury.
9J_l}0CUT
PUSH
STICK
Fig.4g
• 36
F_g.50