ASSEMBLY
CONNECT SHIFT ROD (See Fig. 6)
• Insert end of shift rodfarthest from bend into hole of
shift lever indicator,
• Inserthairpinclipthroughholeof shift rodto secure,
• Insertotherend of shift rod_ntohole in shift lever,
, Insertsecond hairpin clipthroughholeof shift rod.
REMOVE TILLER FROM CRATE
• Make sure shiftlever indicatorts in "N" (neutral)posi-
tion (See Fig, 6)
• Tilt tiller forward by Iiftirlg handie_ Separate cardboard
cover from leveling shield.
• Rotate tiller handle to the right and pull tiller out of
carton,
ATTACH THIS END AI"TACH THIS
TO SHIFT LEVER END TO SHIFT
INDICATOR LEVER _,,1
........ .....................
SHIFT ROD
SHIFT HAIRPIN SHIFT
CLIP LEVER
INDICh;TOR
.......
HAIRPIN CLIP
SHIFT ROD
INSERT CABLE CLIP (See Fig. 7)
• Insert plasticcable clipintohole onthe back ofhandle
column. Pushcables intoclip.
CABLES
'CABLE CLIP
FIG. 7
CHECK TIRE PRESSURE
The tireson your unit were ovednflated at the factoryfor
shipping purposes, Correct and equal tire pressure is
importantfor best tillingperformance.
• Reduce tire pressure to 20 PSt.
HANDLE HEIGHT
• Hand!eheight may be adjusted to better suitoperator.
(See TO ADJUST HANDLE HEIGHT' inthe Service
and Adjustments sectionof thismanual).
FIG, 6
8
