E16
PROBLEM POSSIBLE CAUSE SOLUTION
1. Part or all of Microwave
In-A-Drawer
™
does not
operate.
• Power cord of Microwave In-A-
Drawer
™
is not completely connected
to the electrical outlet.
• Power outage.
• Fuse/circuit breaker at home doesn’t
work.
• Microwave In-A-Drawer
™
is in Demo
Mode.
• Make sure the power cord is tightly con-
nected to the outlet.
• Check house lights to be sure. Call your
local electric company for service.
• Replace the fuse or reset the circuit
breaker.
• See page 14 for how to cancel Demo
Mode.
2. Food in microwave is not
heated.
• No power to the appliance.
• Drawer controls improperly set.
• Drawer is in Demo Mode.
• See SOLUTION for PROBLEM 1.
• Check if the controls have been properly
set.
• See page 14.
3. Microwave In-A-Drawer
™
light does not work.
• Light bulb is loose or burned out. • Call for service.
4. Touch controls will not
operate.
• Control Lock is on. • See page 14 to unlock.
5. Display ashes. • Power failure. • Press the STOP/CLEAR pad and reset
the clock. If the Microwave In-A-Drawer
™
was in use, you must reset the cooking
function.
6. Steam from the vent.
•
During microwaving, steam may
come from the right side of the
vent.
Please check the following before calling for service. It may save you time and expense.
Before You Call For Service
