A SERVICE OF

logo

Open as PDF
next previous
Back to Contents Page
Setting Up the Monitor
Dell™U2711FlatPanelMonitorUser's Guide
Connecting the Monitor
Organizing Your Cables
Attaching the Soundbar (optional)
Connecting Your Monitor
To connect your monitor to the computer perform the following steps/instructions:
l Turnoffyourcomputeranddisconnectthepowercable.
l Connect the USB uplink cable.
l Connect either the white (digital DVI-D) display connector cable, the blue (analog VGA) display connector cable, or the black DisplayPort cable to the
correspondingvideoportonthebackofyourcomputer.Donotuseall the cables on the same computer. Use all the cables only when they are
connectedtodifferentcomputerswithappropriatevideosystems.
Connecting the White DVI Cable and the USB uplink cable
Connecting the Blue VGA Cable and the USB uplink cable

Connecting the Black DisplayPort Cable and the USB uplink cable
After you have completed connecting the DVI/VGA/DisplayPort cable, follow the procedure below to complete setting up your monitor:
l Plugthepowercablesforyourcomputerandmonitorintoanearbyoutlet.
l Turn on the monitor and the computer.
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions.
NOTE: USB uplink cable connection enables USB ports and card reader on the monitor to work.
NOTE: Your monitor supports two DVI ports. You can choose the input source (DVI-D 1 or DVI-D 2) through the OSD menu's Input source select option.
NOTE: The graphics are used for the purpose of illustration only. Appearance of the the computer may vary.