Dell E550mm Color Monitor Quick Setup Guide
2
6.
Plug the power cables of your computer and your monitor into a nearby electrical outlet.
7.
Turn on your computer and monitor. If the monitor does not display an image, refer to the
troubleshooting section of this guide.
1. Earphone jack This jack is for an optional earphone
2. Volume control Use this wheel to adjust audio volume.
3. Power button Use this button to turn the monitor on and off.
4. Power indicator This light glows green during normal operation.
5. ADJUST -/+ These buttons allow you to adjust the settings to lower or higher value of the
selected function.
6. SELECT -/+ These buttons allow you to select from the various functions.
7. Function indicators The indicator will turn green when you select the respective function.
The description of function indicators is as below:
Brightness:
adjusts the background brightness of the screen image.
Contrast:
adjusts the contrast between the foreground and background of the screen image.
Horizontal size:
adjusts screen width.
Horizontal position:
moves screen image to the left or right.
Vertical size:
adjusts screen height.
Vertical position:
moves screen image up or down.
Pincushion:
straightens the left and right vertical edges of the display.
Trapezoid:
adjusts the width of the top and bottom of the screen.
Rotation:
adjusts the viewing area when it is tilted left or right.
Use the monitor CD to install the appropriate monitor driver for your operating system.
Windows 98 automatically detects the new monitor and displays the
Add New Hardware Wizard
dialog box if the monitor driver is not already installed.
1.
Insert the monitor CD into the CD-ROM drive, and click
Next>
twice when the
Add New Hardware
Wizard
dialog box appears.
Click the
CD-ROM drive
box to install the drivers from the CD and then click
Next>
.
Confirm that the driver was found on the CD, and click
Next>
twice to install the driver.
Click
Finish
to exit the
Add New Hardware Wizard
dialog box.
To manually install or update the driver, perform the following steps:
1.
Click
Start−> Settings−> Control Panel
and then double-click
Display
.
In the
Display Properties
window, click the
Settings
tab, and then click
Advanced
.
Click the
Monitor
tab, and then click
Change
.
