A SERVICE OF

logo

Open as PDF
next previous
Back to Contents Page
Setting Up the Monitor
Dell™S1909WN Flat Panel Monitor User's Guide
Attaching the Base
Connecting the Monitor
Attaching the Soundbar (optional)
Removing the Base
Attaching the Base
Connecting Your Monitor
To connect your monitor to the computer:
1. Turnoffyourcomputeranddisconnectthepowercable.
2. Connecttheblue(analogVGA)displayconnectorcabletothecorrespondingvideoportonthebackofyourcomputer.
Connecting the blue VGA cable
NOTE: The base is detached when the monitor is shipped from the factory.
Afterplacingthemonitorpanelonsoftclothorcushion,completethefollowingstepstoattachthebase.
1.
Place the monitor on a stable flat table.
2.
Fit the groove on the base onto the riser of the monitor.
3.
Push the hook to lock the stand base.
CAUTION: Before you begin any of the procedures in this section, follow the Safety Instructions.