Please note!
milk or coffee, press the CAPPUCCINO but-
ton twice.
Do not leave the milk container out of the re-
frigerator for longer than strictly necessary.
The warmer the milk (5°C ideal), the poorer
the froth will be.
metal cup tray at the end of milk delivery.
Making frothed milk (without coffee)
Proceed as described in the previous paragraph
(Making cappuccino or macchiato), pressing the
CAPPUCCINO button twice instead of once.
Please note!
If during delivery you want to stop making milk
or coffee, press the CAPPUCCINO button once.
Preparing milk (unfrothed and without coffee)
Proceed as described in the previous para-
graph (Making frothed milk), turning the froth
adjustment knob to position 1 , instead of
position 2 .
Cleaning the milk frother with the CLEAN
button
“Press CLEAN button” flashes on the display
each time you use a milk function.
To eliminate all milk residues, proceed as fol-
lows:
1. Leave the milk container in the machine (you
do not need to empty it);
2. Place a cup or other recipient under the fro-
thed milk spout.
3. Press the CLEAN button (fig. 33) and keep
pressing until the progress bar which appe-
ars on the display together with the message
“Cleaning...” is complete.
Please note!
one after the other, you do not need to clean
by pressing the CLEAN button each time you
make a cappuccino. Just press it once after
making the last cappuccino (the appliance
can continue making cappuccino or coffee
even if the CLEAN button is not pressed).
nozzle and the milk container as described
on page 15.
Programming the quantity of coffee and milk
in the cup for cappuccino or milk
The appliance is set by default to automatically
deliver standard quantities.
To change these quantities, proceed as follows:
1. Place a cup under the coffee and milk
spouts.
2. Hold the CAPPUCCINO button until the mes-
sage “Milk for Cappuccino Program Quanti-
ty” is displayed.
3. Release the button. The appliance starts de-
livering milk.
4. Once the required quantity of milk has been
delivered into the cup, press the CAPPUCCI-
NO button again.
5. The appliance stops delivering milk and after
a few seconds the coffee is delivered into the
cup. “Coffee for Cappucc. Program Quantity”
is displayed.
6. Once the required quantity of coffee has been
delivered into the cup, press the CAPPUCCI-
NO button. Coffee delivery stops.
The machine is now reprogrammed with the new
quantities.
HEATING WATER
Important! Danger of burns.
Never leave the machine unsupervised while de-
livering hot water.
The spout becomes hot during delivery. Hold by
the handle only.
1. Make sure the hot water spout is attached
correctly (fig. 4).
2. Place a container under the spout (as close
as possible to avoid splashes).
3. Press the button (fig. 2). “Hot water…”
is displayed, together with a progress bar
which fills gradually as preparation proce-
eds.
4. The machine delivers 250 ml of hot water,
then delivery stops automatically. To inter-
rupt delivery of hot water manually, press
the button again.
Please note!
If “Energy Saving” mode is active, you may have
