A SERVICE OF

logo

Troubleshooting
40
3
Inserting Toner
1: Hold the new bottle horizontally and
shake it from side to side five or six times.
2: Remove the black cap.
Note
Do not remove the black cap before
shaking.
Do not remove the inner cap.
3: Put the toner bottle on the holder, and
then pull its top forward.
4: Push in the green lever until it clicks.
5: Press down the green lever.
6: Close the machine's front cover.
ABU035S
ABU036S
StellaC2_GBcopy_F1_pre_FM.book Page 40 Tuesday, December 16, 2003 4:39 PM