xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
DGS–3426:5# create iproute default 172.18.212.253 1
Command: create iproute default 172.18.212.253 1
Success.
DGS–3426:5#
DGS–3426:5##––––––––––––––––––––––––––––––––––––––––––––––––––––
DGS–3426:5## End of configuration file for DGS–3426
DGS–3426:5#
**********
* Logout *
**********
NOTE: With auto-configuration enabled, the Switch IPIF settings now define the Switch
as a DHCP client. Use the show switch command to display the new IP settings status.
disable autoconfig
Purpose Use this to deactivate auto-configuration from DHCP.
Syntax
disable autoconfig
Description This instructs the Switch not to accept auto-configuration instruction from the DHCP
server. This does not change the IP settings of the Switch. The IPIFsettings will continue
as DHCP client until changed with the config ipif command.
Parameters Only Administrator and Operator-level users can issue this command.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To stop the auto-configuration function:
DGS–3426:5#disable autoconfig
Command: disable autoconfig
Success.
DGS–3426:5#
show autoconfig
Purpose Used to display the current auto-configuration status of the Switch.
Syntax
show autoconfig
Description This will list the current status of the auto-configuration function.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To view the auto-configuration status:
64
