A SERVICE OF

logo

Open as PDF
next previous
4. While firmly holding the headlight housing in your
hands unlock and disconnect headlight bulb connector.
5. Twist 1/4 turn and remove headlight bulb from hous-
ing and replace.
NOTE: It is not necessary to disconnect the connector to
replace the park/turn signal bulb. If the bulb socket
needs replacement disconnect the connector.
NOTE: The headlight bulb is a Halogen bulb. Take care
not to touch the bulb with your fingers. Body oils from
your fingers could cause excessive heat buildup which
reduces bulb life.
To remove the park/turn signal bulb, rotate bulb socket
1/4 turn and remove socket from housing. Pull bulb
straight from socket.
Unlocking Headlight Connector
MAINTAINING YOUR VEHICLE 375
7