A SERVICE OF

logo

Open as PDF
next previous
E
72
Changing the number plate and stop light bulbs
Loosen the two screws (1) securing tail light support to
number plate holder, on the inboard side.
Loosen screw (2) and slightly slide out tail light support
(fig. 64).
Disconnect connector (A) of the rear wiring and remove tail
light support (fig. 65).
1
2
fig. 64
A
fig. 65
DUCum_1000DS####03_###e.book Page 72 Wednesday, March 12, 2003 4:33 PM