50 electrolux installation instructions
Electrical connection/power supply
The oven must be connected to the
electricity supply by a designated elec-
trician.
Use a H05VV-F type power cable or
higher.
The appliance must be installed with a
socket supply line, otherwise the fixed
home electrical system must include an
isolating device with at least a 3mm-
contact separation to enable a simulta-
neous and all-pole cut off from the
mains, according to NIN 2000.
When connecting the appliance directly
to the mains, use at least a 120cm long
cable.
1. Lay the power cable flush to the
base of the recess.
2. Take hold of the appliance by the
side grips and slide it ¾ of the way
into the recess.
3. Remove the terminal box from un-
derneath.
4. Opening the terminal box (detail D)
5. Open the catch on the cord grip (de-
tail E).
6. See the connection diagram for the
terminal connection.
7. Secure the cord grip by pressing
firmly on the catch (detail F).
8. Closing the terminal box.
9. Tighten the screws on the terminal
box from underneath.
10.Do not use the terminal box to con-
nect other appliances (e.g. hobs).
In case of repair the appliance must
be switched off from the mains.
