Model
Dimensions
Number A B C
SS8230L 1410 381 610
SS8236L 1562 457 610
SS8248L 1867 610 610
SS8254L 2019 686 610
SS8260L 2172 762 610
• SSC8200L
Model
Dimensions
Number A B
SS8230 838 381
SS8236 991 457
SS8242 1143 533
SS8248 1295 610
SS8254 1448 686
SS8260 1600 762
• SSC8200
GENERAL
Model No. SS_________ #14 gauge, type
304 stainless steel scullery sink. Compart-
ments 356mm deep. Square corner weld-
ed construction. Full length 203mm high
backsplash with 45° sloped top. 38mm
wide sloping top channel rims. Integral
drainboard/s, sink compartments pitched
to drain. Exposed surfaces polished to a
satin finish.
Sinks supported on (4) LK251 stainless
steel, 41mm O.D. tubular legs, #16 gauge
wall thickness. Adjustable bullet shaped
feet.
Shaded areas are models carried
in stock with standard faucet
location.
Non-shaded areas with specified
dimensions are standard models
which must be made to order –
standard faucet location unless
otherwise specified.
Last item in each group is custom.
Fill in dimensions. Standard faucet
location unless otherwise specified.
Drainboards over 648mm furnished
with one tubular leg.
Drainboards over 1,219mm fur-
nished with two tubular legs.
SPECIFIED FITTINGS:
SUPPLY:
DRAIN:
FURNISHED WITH:
LK251. (Four) Stainless steel tubular legs,
41mm O.D., #16 gauge. Adjustable bullet
feet.
ALL DIMENSIONS IN MILLIMETERS.
SEE OTHER SIDE FOR DIMENSIONS IN INCHES.
INDICATE NUMBER OF FAUCET HOLES WHEN
PLACING ORDER. (NON-STANDARD FAUCET
AND OVERFLOW DRILLING LOCATIONS ARE
AVAILABLE. SPECIFY ON DRAWING AT RIGHT.)
NO DRAINBOARD
•
Model
Dimensions
Number A B C
SS8230R 1410 381 610
SS8236R 1562 457 610
SS8248R 1867 610 610
SS8254R 2019 686 610
SS8260R 2172 762 610
• SSC8200R
RIGHT DRAINBOARD
LEFT DRAINBOARD
RIGHT & LEFT DRAINBOARD
(CHECK MODEL SPECIFIED):
