GENERAL
Model No. WNSF______ #14 gauge, type
304, (18-8) stainless steel scullery sink.
Compartments 356mm deep. Welded 6mm
radius coved corner construction. Welds
are ground to a smooth and cleanable
finish. Full length 203mm high backsplash
with 45° sloped top. 38mm wide inward
sloping top channel rims. Integral drain-
board/s, sink compartments pitched to
drain. Exposed surfaces polished to a
satin finish. Weldbilt sinks carry the NSF
International Certification.
Sinks supported on (4)
LK251 stainless
steel, 41mm O.D. tubular legs, #16 gauge
wall thickness. Adjustable bullet shaped
feet.
Shaded models are normally
carried in stock with standard
faucet location.
Non-shaded models with speci-
fied dimensions are considered
standard models which must be
made to order–standard faucet
location unless otherwise specified.
Last item in each group is custom.
Fill in dimensions. Standard faucet
location unless otherwise specified.
Drainboards over 648mm long fur-
nished with one tubular leg.
Drainboards over 1,219mm long
furnished with two tubular legs.
SPECIFIED FITTINGS:
SUPPLY:
DRAIN:
ALL DIMENSIONS IN MILLIMETERS.
SEE OTHER SIDE FOR DIMENSIONS IN INCHES.
•
Weldbilt
®
Double Compartment Scullery Sink
6mm Radius Coved Corner
