CHAPTER 1: GETTING STARTED
1.2 A BOUT THIS MANUAL
This document provides guidelines and instructions on how to install, configure and
operate the HS500E Industrial Ethernet Antenna. Descriptions of the RFID command
set are also included, as are instructions detailing how to issue commands from a
Host computer to the HS500E.
1.2.1 Who Should Read this Manual?
Those who will be installing, configuring and operating the HS500E should read this
manual. This may include the following people:
•
Hardware Installers
•
System Integrators
•
Project Managers
•
IT Personnel
•
System and Database Administrators
•
Software Application Engineers
•
Service and Maintenance Engineers
1.2.2 HEX Notation
In this manual, numbers expressed in Hexadecimal notation are prefaced with “0x”.
For example, the number "10" in decimal is expressed as "0x0A" in hexadecimal.
See
Appendix A for a chart containing Hex values, ASCII characters and their
corresponding decimal integers.
HS500E – OPERATOR’S MANUAL P/N: 17-1305 REV02 (12-05)
PAGE 9 OF 82
