A SERVICE OF

logo

3.
If you need to adjust the position of the perforation so that it
meets the printer’s tear-off edge, press the MICRO FEED buttons
to feed the paper forward or backward in 1/216th-inch
increments. (You can also hold down either MICRO FEED button
to feed the paper continuously.)
Note: You can reset the tear-off position only when you are in
the tear-off mode (after you have pressed the TEAR OFF button
once and the TEAR OFF light is on). The printer remembers the
new tear-off position even after the printer is turned off, reset,
or initialized.
2-22
Loading and Using Paper