EPL-7500 LASER PRINTER
Control Panel
The printer control panel is made up of three elements: buttons,
indicator lights, and a liquid crystal display. You use the buttons
to select printer settings and functions, and the indicator lights and
display let you monitor the current status of the printer.
Display
I
Default settings in PostScript mode
Item
Factory Reset Reset
E3 CONTINUE
Paper input
Standard paper cassette SelecType setting
I
Paper size
Letter or A4 SelecType setting
Top margin
0.16 inches 0.16 inches
I
Left margin
0.16 inches
0.16 inches
SelecType
Right margin
0.16 inches
0.16 inches
Bottom margin
0.16 Inches
0.16 Inches
The following menu maps show the possible menus and
Application Software
options available in SelecType mode. An asterisk (*) Indicates
the factory setting. See Chapter 3 for a description of each
option.
PostScript mode
SelecType Level 1
Check to see that the SOFTWARE option in SelecType Level 1 is
set to PostScript. If not, follow the steps described in Chapter 3 to
change the printer mode with SelecType.
For PC users: Choose EPL-7500 from the printer selection menu in
your application program. If the menu does not list the EPL-7500,
choose any PostScript printer.
For Macintosh users: Check your Macintosh documentation for
instructions on installing a printer. If the EPL-7500 is not listed
among the printer options, choose the LaserWriter”.
HP emulation mode
If your application program doesn’t support the PostScript
language, or if you are using a program written specifically for the
HP LaserJet, use the SelecType Level 1 SOFTWARE option to set
your printer to HP emulation mode. Then choose the first printer
available from the list below from your application program’s
printer selection menu.
HP LaserJet series
llTM
HP LaserJet
I’lusTM
HP LaserJet
500TM
HP
LaserJetTM
If none of these printers are listed among your program’s options,
select any printer that uses the HP Printer Command Language
(PCL).
Printing a test file
After you install the software, create and print a test file using the
fonts, symbols, features and formats that you use most often.
Printing the test file shows you how the EPL-7500 works with
your application program.
Note: The factory settings of PAPERSIZE STD TRAY and
PAPERSIZE OPT TRAY depend on the country.
Laser Printers 1/7/91
EPL-7500-5
