Choosing a Place for the Printer
The illustration below shows a good printer location.
Notes: If you plan to use a printer stand, follow these guidelines
to select and set up the stand:
The stand should be able to support at least
128
lbs.
(58
kg),
which is twice the weight of the
DFX-8000
printer.
Never use a stand that supports the printer at an angle. The
printer should always be kept level.
If you keep your paper supply underneath the printer stand,
be sure there is enough clearance to prevent the paper from
catching on the underside of the stand. Also, check to see that
the distance between the stand supports is wide enough to
accommodate the paper you will be using.
Position your printer’s power cable and interface cable so that
they do not interfere with paper feeding. If possible, fasten the
cables to the printer stand to keep them away from the paper.
1-8
Setting Up the Printer
