94 EpsonNet MacAssist Configuration Utility
R4CB110
User’s Guide Rev.C
EPMAC.fm A5 size
8/21/03
L
Proof Sign-off:
KOW M. Arai H. Tomizawa
K. Nishi
NOC K. Lee
About Password
A password is required to configure the print server. When you
click OK in the setting dialog box or click Return to Default, the
Password dialog box appears.
1. To set the password or to change the current password, click
Change Password. The Change Password dialog box
appears.
2. When you set a password for the first time, leave the Current
Password box blank, and enter a password in the New
Password box and in the New Password (again) box (up to 20
characters). Then click OK. Passwords are case sensitive.
Note:
❏ The same password is used for EpsonNet WinAssist,
MacAssist, and WebAssist.
❏ Since the new password takes effect after the data is sent to the
print server, enter the old password immediately after changing
the password.
❏ If you forget your password, you need to initialize the print
server. See “Initializing the Print Server” on page 237 for
instructions.
