A SERVICE OF

logo

12
14
13
14
Getting Started Getting Started
1-15 1-16
- Pull the green tractor lock levers (12) toward you to release the tractors. - Open the tractor covers (16) and insert the paper.
- Lock both green tractor levels - Close the tractor covers.
- Roughly adjust the tractors (13) to the paper width, and space out the paper - Tighten the upper edge of the fanfold paper by slightly pushing the right
supports (14) evenly. tractor to the right. Make sure not to stress the paper too much.
- Lock the tractors by pushing back the green lock lever again.
- Reapply the manual front insertion guide
Note: If you do not refit the manual front insertion guide, there is no
guarantee for a proper paper transport and accurate printing.