88 Printing and Scanning Without a Computer
If you want to save a different group of settings, repeat step 1. This will replace
your previously saved settings.
Restoring Default Settings
If you want to reset print and copy settings to their original default settings, follow
these steps:
1. Press the
Setup button.
2. Use the u and d buttons to choose
Restore to Factory Settings.
3. Press
OK, then press OK again to restore your settings.
4. You see a confirmation that settings have been restored. Press the
OK button.
Printing From an Index Sheet
An index sheet lets you see small thumbnail images of the pictures on your
memory card and provides an automated process to print your photos.
Printing the Index Sheet
1. Press the Memory Card button.
2. Use the u and d buttons to highlight
Index Sheet, then press the OK
button.
3. Use the u and d buttons to highlight
Print Index Sheet.
4. Load several sheets of plain, letter-size paper. (If there are more than 36 images
on the card, you will need multiple sheets of paper to print the index sheets.)
5. Press the x
Color button to print the index sheet.
Note:
To cancel a print job while printing, press the y Stop button.
SP RX600 Users Guide.book Page 88 Thursday, January 29, 2004 1:08 PM
