5-10 Commands
Decimal 27 70
n
[Range] 0≤
n
≤ 255
[Description] Sets or cancels the slip paper reverse eject
• When the LSB is 0, cancels the slip paper reverse eject and sets
the slip paper forward eject.
• When the LSB is 1, sets the slip paper reverse eject.
ESC G
n
[Name] Turn double-strike mode on/off
[Format] ASCII ESC G
n
Hex 1B 47
n
Decimal 27 71
n
[Range] 0 ≤ n ≤ 255
[Description] Turns double-strike mode on or off.
• When the LSB is 0, double-strike mode is turned off.
• When the LSB is 1, double-strike mode is turned on.
ESC J
n
[Name] Print and feed paper
[Format] ASCII ESC J
n
Hex 1B 4A
n
Decimal 27 74
n
[Range] 0 ≤
n
≤ 255
[Description] Prints the data in the print buffer and feeds the paper [
n
× vertical or
horizontal motion unit] inches.
ESC K
n
[Name] Print and reverse feed
[Format] ASCII ESC K
n
Hex 1B 4B
n
Decimal 27 75
n
[Range] 0 ≤
n
≤ 255
[Description] Prints the data in the print buffer and feeds the paper
n
× vertical motion
unit inches in the reverse direction
This command is available only when the slip paper is selected as the print sheet.
ESC L
[Name] Select page mode
[Format] ASCII ESC L
Hex 1B 4C
Decimal 27 76
[Description] Switches from standard mode to page mode.
