28
To answer call, simply press PTT and begin talking if
caller’s ID is still in display. If caller’s ID is no longer
in display, the CALL indicator will be illuminated,
indicating the radio received an Individual call. Press
the key to display caller’s ID, then press PTT
and begin talking.
GROUP CALL - When the radio receives a group
call, it unsquelches on the assigned channel and
lights the BUSY flag. If programmed on, the group
call received tone (single tone) will sound. The radio
can also be programmed to display the Group name
originators ID.
INTERCONNECT CALL - If an interconnect call
(telephone call directed to your radio) is received, the
radio unsquelches on the assigned channel. The
radio displays PHN CAL and the CALL and BUSY
flags turn on. If programmed on, the interconnect
call received tones (one high followed by one low)
will sound. The PHONE and
status flags will be
displayed.
The optional call received tones are programmed off
by default.
NOTE
5. Using the VOLUME knob, adjust the volume as
necessary.
