FS-8700-97_Lutron_Machine Manual Page 3 of 11
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldserver.com
1. Lutron Machine Description
The Lutron Machine driver allows the FieldServer to transfer data to and from devices over RS-
232 using Lutron eLumen protocol. The FieldServer can emulate either a Server or Client,
although the Lutron Machine driver is only available in Client configuration. Any Server drivers
are for FieldServer testing purposes only.
Max Nodes Supported
FieldServer Mode Nodes Comments
Client 1
Only one Lutron Machine driver Client node is able to be
connected to a Lutron eLumen panel.
Server 1
One BACNet IP node provides an upstream interface to the
Lutron eLumen panel.
The Lutron Grafik Machine Zone/Area Machine driver, hereafter simply referred to as the Lutron
Machine driver, provides a BACNet IP interface to a Lutron eLumen panel. The driver can be
configured to represent zones or areas as used in the Lutron eLumen panel. The FieldServer
acts as both Client and Server to provide BACNet objects to an external BACNet Client. In
Server mode, the FieldServer collects data from the eLumen panel and holds the data ready for
reads from an external BACNet Client. In Client mode, the FieldServer executes pre-defined
commands on the eLumen panel, for example, running scripts.
