A SERVICE OF

logo

9
QuickTips
Make sure all cable
connectors are fully
seated on jacks.
Always match cables
according to the
colors;
RED for right
audio,
WHITE for left
audio and
YELLOW for
video.
A solid Blue screen
with the words Video
displayed means that
the Video mode is
selected, but no
signal is being
detected at the
Video jack.
Position your TV at
least 2 feet from
stereo speakers. The
magnets in the
speakers may affect
the picture quality.
However, all Fisher
STV model speakers
are stray field
compensated and
may be placed next
to TV sets without
any special
precautions.
Do not connect
external speakers
directly to the TV.
USING THE REAR AUDIO / VIDEO INPUT JACKS
CONNECTING A VCR OR OTHER EXTERNAL EQUIPMENT
Switch off TV and external equipment before connecting cables. (Cables are not supplied.)
1. Connect VCR or other equipment’s Audio Out (R/L) to the TV Audio Input (R/L)
.
For Mono VCR (Single Audio Jack) connect VCR Audio Out to TV
Audio (L) In.
2. Connect VCR or other equipment’s Video Out to the TV Video In
.
3. Press POWER
to turn on the TV. Turn on external equipment also.
4. Press the INPUT key
to select program source: TV signal or signal from the equip-
ment you have connected to the A/V jacks.
CH3 CH4
IN
OUT
A/V JACKS
RF
CHANNEL
R- -L
AUDIO VIDEO
R- -LAUDIO
VIDEO
AUDIO VIDEO INPUT
AV2
(MON0)
L
R
L
R
VIDEO
AUDIO
UHF/VHF/CATV
75
AUDIO
OUTPUT
BACK VIEW OF VCR
INPUT
MENU RECALL
RESET
CH
POWER
REMOTE CONTROL
USING THE AUDIO OUTPUT JACKS
CONNECTING A STEREO AMPLIFIER TO AUDIO OUT JACKS
1. Connect the TV Audio Out (R/L)
to the Stereo Amplifier In (R/L)
.
2. Press POWER to turn on the TV. Turn on external equipment also.
AUDIO VIDEO INPUT
AV2
(MON0)
L
R
L
R
VIDEO
AUDIO
UHF/VHF/CATV
75
AUDIO
OUTPUT
TV A/V INPUT REAR JACKS
BACK OF TV
STEREO AMPLIFIER