A SERVICE OF

logo

2.PressS1/S2buttontoselectdeclinationanglesetting
 mode.Themessage“DECLIN”willbedisplayed.
3.PressS3button,Ewillblink.
4.PressS1/S2buttontotogglebetweenE(East)&W(West).
5.PressS3button.Thedeclinationanglewillblink.
6.PressS1/S2tosetthedegreefrom0˚to90˚.
7.Afternishmakingallthesettings,pressS4buttonto
 returntoCOMPASSmode.
TO CALIBRATE THE COMPASS
1.InCOMPASSmode,pressandholdS4foraround3
 seconds.Themessage“CALIB”willbedisplayed.
2.PressS3buttontostartthecalibration.
3.Whenthemessage“2-TURN”isdisplayed,aseriesof
 movingdotswillbedisplayedattherimofthedisplay
 andincreaseinclockwisedirection.Rotatethewatch
 horizontallyincounter-clockwisedirectioninorderto
 freezethelastmovingblinkingdottostayat12-hour
 position.
4.Whenthewatchisrotatedcompletelyfor360degrees,
 themessage“1-TURN”willbedisplayed.Rotatethe
 watchagainincounter-clockwisedirection.
5.Tointerruptandstopthecalibration,
 pressS4button.Themessage“DISTORT”willbedis
 playedandthewatchwillreturntoCOMPASS
 modeafter3seconds.
6.Whenthecalibrationisdone,themessage“DONE”will
 bedisplayedandthewatchwillreturntoCOMPASS
 modeafter2seconds.
TO TAKE A NEW “MARK ANGLE”
InCOMPASSmode,
Youmustmoveyourwatchhorizontally
8