Appendix A Functions Provided by the PRIMEQUEST 2000 Series
A.2.4 Hardware status display
204
A.2 Correspondence between Functions and Interfaces
The following shows the correspondence between the functions provided by PRIMEQUEST 2000 series and
interfaces.
A.2.1 System information display
TABLE A.8 System information display
System status display
(Error, Warning)
System event log (SEL)
display
System event log (SEL)
download
MMB Web-UI/CLI operating
log display
System information display
(P/N, S/ N)
A.2.2 System settings
TABLE A.9 System settings
Primary and secondary power feed
Power-on setting at power recovery
Start delay time at power recovery
It sets it to Reserved SB at the maximum
waiting time until Force Power Off of
Partition including correspondence SB at
Effective and invalid setting of Power
Saving function as the entire System
Power consumption threshold (Limit value)
setting of the entire System
A.2.3 System operation
TABLE A.10 System operation
System power control (On/Off/Force P-off)
A.2.4 Hardware status display
TABLE A.11 Hardware status display
LED operation (on, clear, blinking)
