1. OPERATION
17
1.18 How to Change the Unit of Measurement
You can change the displayed unit of measurement for depth and speed using the following
procedure.
1. Press the MENU/ESC key to open the Main menu.
2. Select [Display] using S or T, then press the ENT key.
3. Select [Unit] using S or T, then press the ENT key. This will open the
[Unit] pop-up window.
4. Select the [Depth] or [Speed] using S or T, then press ENT to open the
settings pop-up window. The available options are shown in the table below.
5. Press the MENU/ESC key three times to close the menu.
1.19 How to Select the Displayed Course
You can select a course reference, true or magnetic.
1. Press the MENU/ESC key to open the Main menu.
2. Select [Display] using S or T, then press the ENT key.
3. Select [Course] using S or T, then press the ENT key. This will open
a pop-up window.
4. Select the course display using S or T, then press ENT to apply the
setting. The available options are [True] and [Magnetic].
5. Press the MENU/ESC key twice to close the menu.
1.20 How to Change the Colour Scheme
You can change the colour scheme of the display as follows:
1. Press the MENU/ESC key to open the Main menu.
2. Select [Display] using S or T, then press the ENT key.
3. Select [Colour] using S or T, then press the ENT key. This will open a
pop-up window.
4. Select the colour scheme using S or T, then press ENT to apply the setting
and close the pop-up window. The available options are shown in the figure to the right.
5. Press the MENU/ESC key twice to close the menu.
Item Unit
Depth m (meters)
ft (feet)
Speed kn (knots)
MPH (Miles Per Hour)
km/h (Kilometers Per Hour)
Color scheme Background Color Text Color
Amber Black White
Black Black White
Blue White Black
White White Black
