3
Hold to turn on the sensor.
Turn on the other device and enable
the Bluetooth component.
You can refer to the device’s
documentation for specic instructions
about enabling Bluetooth wireless
technology.
Bring the sensor within 30 feet (10
meters) of the mobile device.
Using the mobile device, pair the
sensor with the mobile device.
The blue LED is solid blue when the
sensor is connected to the other device.
If the sensor has not established a
Bluetooth connection for several minutes,
it turns off automatically.
Slow ashing
blue
Searching for mobile devices
Rapid ashing
blue
Pairing
Solid blue Connected to mobile device
Slow ashing orange Charging
Solid orange Battery charged,
power connected.
Orange off Battery charged,
power disconnected.
Rapid ashing orange Low battery
Alternating orange
and green
Faulty battery or
system error
Flashing green Searching for GPS
satellites
Solid green GPS satellite x
Verify that the blue LED on the sensor
is solid blue, indicating a wireless
connection.
Place the sensor where it has a clear
view of the sky.
Acquiring satellite signals may take a
few minutes. The Status LED ashes
green while searching for satellites and
establishing your location. The Status LED
is solid green when it has established a x
on your location.
