A SERVICE OF

logo

Open as PDF
next previous
Appendix
GPSMAP 400/500 Series Owner’s Manual 65
contains data copy protection.
—Your unit needs to have an SD card inserted into the SD card
slot in order to perform the function you requested.
—shows the MMSI or name associated
with an MMSI.
—internal problem with the unit. Contact your dealer or
Garmin Product Support to have the unit serviced.
—the Deep Water Alarm depth has been reached.
—the MMSI number is
already in the DSC directory. Use a different number.
—the DSC directory has
reached the maximum of 100 contacts. Delete unneeded contacts to add new
ones.
—a DSC distress call has been received. Take appropriate action.
—the target water temperature
is 2°F (1.1°C) above or below the temperature specied by the Water
Temperature Alarm. These messages appear when you enter or leave that zone.
—the boat is approaching a safe region as dened by
your conguration settings.
—the boat is approaching an unsafe region as dened
by your conguration settings.
—a beep sounds (if enabled) when a sh is detected. This alarm
does not show a message banner.
—enter a valid MMSI.
—the unit has lost satellite signals. Check antenna
connections or try moving to a location with a clear view of the sky.
—you must enter an appropriate Keel
Offset for the transducer (page 51).
attempted to transfer
user data from an SD card that does not contain the specied type of data.
Make sure there is data to transfer on the SD card.
—you are off course the distance set in the “Off Course”
alarm.
—you entered a route name that already exists in
memory. Modify the route name or delete the previous route name.
—you attempted to add more than 250 points to a route. Reduce
the number of points or create a second route.
—an uploaded route from another device has more than 250
waypoints and was truncated to t.
—no additional route waypoints can be saved.
—the Shallow Water Alarm depth has been reached.
—the external sonar device you are connected to
needs a software update.
—there is an internal problem with the unit. Contact your
dealer or Garmin Product Support to have the unit serviced.
—the external sonar device you were connected to has