A SERVICE OF

logo

Garmin G1000 Pilot’s Guide for the Diamond DA40/40F
190-00592-06 Rev. A84
ENGINE INDICATION SYSTEM
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICESINDEX
3.4 EIS DISPLAY IN REVERSIONARY MODE
In reversionary display mode, the remaining display is re-configured to present PFD symbology together with
the EIS Display (refer to the System Overview for information about display Reversionary Mode).
When the G1000 displays enter reversionary mode, the EIS is separated into three displays: Engine (identical to
the normal EIS Display on the MFD), Lean, and System. For a description of the Engine Display, refer to Section
3.1. The Lean Display presents temperature information and assistance for engine leaning. The System Display
shows various system parameters and fuel calculations.
Figure 3-8 Reversionary Mode (DA40)
EIS Display