20 StreetPilot 7200/7500 Owner’s Manual
LOADING FILES ON YOUR STREETPILOT
Your StreetPilot 7200/7500 can store files, such as MP3
music files and Custom POIs. Using the USB Mass
Storage mode, copy and paste files to the StreetPilot
internal memory or to an optional SD Card.
Step 1: Load the USB Drivers
Before connecting the USB cable to your computer,
place the enclosed USB Driver CD-ROM into your
computer’s CD-ROM drive.
If the CD-ROM does not start automatically, click
Start
and then Run…. Type the letter of your CD-ROM drive
followed by “setup” (example: “D:\setup”). Then press
Enter.
Follow the instructions on your computer’s screen.
Step 2: Connect AC Power
Connect the enclosed AC Power cable to the Power
connector on the right side of the StreetPilot. Connect
the end to an available electrical outlet.
Step 3: Insert an SD Card (Optional)
The SD card slot is located on the left-hand side of the
StreetPilot. Press the card in until it clicks.
Inserting an SD Card
LOADING FILES ON YOUR STREETPILOT
