Gefen EXT-DVI-848 Manual

A SERVICE OF

next previous

14

RMT-8-IR IR CHANNEL CONFIGURATION

The RMT-8-IR remote control (sold separately) has 4 discrete IR channels for use if

the default IR code set conﬂ icts with other remote control commands in your setup.

There are 2 DIP Switches underneath the battery on the RMT-8-IR remote control

that must match DIP Switches on the EXT-RMT-MATRIX-848. There are 4 DIP

Switches located on the underside of the EXT-RMT-MATRIX-848. DIP Switches 1

and 2 on the EXT-RMT-MATRIX-848 correspond to DIP Switches 1 and 2 on the

RMT-8-IR remote control. See below for DIP Switch conﬁ guration of each of the

available remote channels.

Remote Channel 1:

Default

1 2

Remote Channel 2:

1 2

Remote Channel 3:

1 2

Remote Channel 4:

1 2

RMT-8-IR REMOTE CONTROL

RMT-8-IR DIP Switches

cha

nn

els.

EXT-RMT-MATRIX-848

Remote Channel 1:

Default

Remote Channel 4:

1

1

2

2

3

3

4

4

Remote Channel 3:

1

2

3

4

Remote Channel 2:

1

2

3

4