A SERVICE OF

logo

Setup
313384B 7
Setup
Preparation
1. Connect air and material hoses to gun. Tighten
securely.
2. Connect one end of material hose (cc) to material
outlet (K or L) and other end to gun material inlet
(bb).
3. Open gun air valve (23).
Removing and Installing Hopper
Hopper (G) can be removed from cart for cleaning and
when using Siphon Kit 248112 (available from Graco
distributor).
Removing Hopper (G)
1. Push down 2 latches on each side of hopper cou-
pler (H).
2. Lift hopper (G) straight up off of unit.
NOTE: Material plug must be installed in material
outlet (K or L) you are not using.
ti4003a
23
ti3778b
L
N
dd
cc
K
ti3899a
ti3900a