Basic American Medical Products, a division of GF Health Products, Inc. www.grahamfield.com 999-0831-190A Service Manual
12
STEP 1. HEAD RETAINER INSTALLATION
1. Position retainer with curved end toward headboard.
2. Squeeze ends of the retainer toward the inside of
the bed and lower between the deck rails and first
outside grid wires.
3. Align the ends of retainer with small holes on the
inside of deck rails and slowly release.
STEP 2. FOOT-END RETAINER
INSTALLATION
1. Position retainer with curved end toward footboard.
2. Squeeze ends of the retainer toward the inside of
the bed and lower between the deck rails and first
outside grid wires.
3. Align the ends of retainer with small holes on the
inside of deck rails and slowly release.
STEP 3. RETAINER POSITIONS
• FOR 80” BEDS: Use outside small holes.
See sample at right.
• FOR 76” BEDS: Use inside small holes.
See sample at right.
!
Be sure to use a mattress that is properly sized to fit
the sleep deck, which will remain centered on the
deck relative to State and Federal Guidelines. Use
of an improperly fitted mattress could result in injury
or death.
!
Use a properly sized mattress in order to minimize
the gap between the side of the mattress and assist
devices. This gap must be small enough to prevent
resident/patient from getting his/her head or neck
caught in this location.
Zenith aps seRies
STANDARD MATTRESS RETAINER INSTALLATION
