A SERVICE OF

logo

16
Assembly
T
M
Steering
Bushing
Vehicle
Frame
Neck
•Position the vehicle frame so that the front faces you.
Fit a steering bushing underneath the neck of the
vehicle frame.
•Insert a #8 x
3
/4" screw into each end of the steering
bushing and tighten.
Front View
21
Fit the headlight lens onto the headlight housing.
•Insert three #8 x
3
/4" screws into the headlight lens
and tighten.
Headlight
Lens
Headlight
Housing
22
Front Fork
Lower Hole
Lower
Hole
Front Fork
Cover
Fit the front fork into the front fork cover.
•Insert two #8 x
1
/2" screws into the lower holes in the
front fork and tighten.
23
24
Headlight
Assembly
Center
Holes
Front Fork
Assembly
•Position the headlight assembly with the lens down on a
flat surface.
•Fit the front fork assembly onto the back of the headlight
assembly, as shown.
•Insert two #8 x
3
/4" screws through the center holes in
the front fork assembly and into the headlight assembly.
Tighten the screws.