48 5 - Control panel ENWW
Control-panel messages
The following table describes some of the common control-panel messages.
For information on:
z Replacing the printheads or ink cartridges: See Replacing the ink cartridges and
Maintaining the printheads.
z Loading paper: See Loading media.
Message Description
CLOSE ALL COVERS The printer cannot print because one or more of the
covers is open.
Ensure all covers are properly closed.
ENSURE REAR ACCESS PANEL IS PROPERLY
CLOSED
The rear access panel is not closed properly.
Push it in firmly until it locks into place.
[TRAY X OR ACCESSORY] NOT AVAILABLE... The tray or auto-duplex unit is not available.
To use media from another tray or print without
duplexing, press
(Resume button). To cancel the
print job, press
(Cancel button).
CARRIAGE STALL... Something is preventing the carriage from moving.
Open the top cover, clear the obstruction, and then
press
(Resume button) to continue printing.
LOAD [SIZE] MEDIA IN TRAY [X]. PRESS
RESUME TO CONTINUE.
LOAD [TYPE][SIZE] MEDIA IN TRAY [X].
PRESS RESUME TO CONTINUE.
The specified tray is either empty or contains media
whose type and/or size are different from what have
been selected for the print job.
Load the correct media into the tray, and
press (Resume button) to continue printing.
PAPER JAM... Media is jammed in the printer.
See Clearing jams.
PRINTED PAGE IS DRYING. PRESS RESUME TO
CONTINUE.
The printer is waiting for the printed page to dry before
continuing to print. You can remove the page from the
output tray (handle it carefully to avoid smearing
the ink), and press
(Resume button) to start printing
the next page.
REMOVE PRINTED PAGES FROM OUTPUT TRAY.
PRESS RESUME TO CONTINUE
The output tray is full.
Remove the printed pages and
press (Resume button) to continue printing.
REPLACE INCOMPATIBLE OR FAULTY [COLOR]
PRINTHEAD
REPLACE INCOMPATIBLE OR FAULTY [COLOR]
INK CARTRIDGE
The printhead or ink cartridge is either incompatible or
faulty.
Replace with a HP printhead or ink cartridge to
continue printing.
INSTALL [COLOR] PRINTHEAD
INSTALL [COLOR] INK CARTRIDGE
The printhead or ink cartridge is either missing or not
installed correctly.
Ensure the printhead or ink cartridge is in its correct
color-coded slot, and press down firmly to ensure
proper contact.
INK LOW IN [COLOR] CARTRIDGE The ink cartridge is running low on ink and will need to
be replaced soon.
Press
(Resume button) to clear this message.
REPLACE EMPTY [COLOR] INK CARTRIDGE
REPLACE EXPIRED [COLOR] INK CARTRIDGE
The ink cartridge is either empty or has expired.
Replace with a HP ink cartridge to continue printing.
