Technical Specifications
87hp StorageWorks SAN Switch 2/8 Installation Guide
Environmental Requirements
Table 7 lists the environmental ranges that are acceptable when the SAN Switch
EL is operating, and the acceptable ranges when the switch is not operating.
Memory Specifications
The SAN Switch 2/8 uses the following memory.
■ Main Memory (SDRAM): 32 MB per switch
■ Flash Memory: Dual 8 MB
■ Boot Flash: 512K bytes of 8-bit for system boot
The centralized memory maximizes the overall switch throughput by guaranteeing
full transmit and receive bandwidth to all Fibre Channel ports at all times.
Table 8: Environmental Requirements
Condition Acceptable Range
Temperature (operating) 10°C to 40°C
Temperature (non-operating) -25°C to 70°C
Humidity (operating) 20% to 85% RH non condensing, at
40°C
Humidity (non-operating) 0% to 90% RH non-conducting, at 40°C
Altitude (operating) 0 to 3 kilometers above sea level
Altitude (non-operating) 0 to 12 kilometers above sea level
Shock (operating) 4G, 11MS duration, half sine
Shock (non-operating) 20G, 11MS duration, sq.wave
Vibration (operating) 5G, 0-3 kHz at 1.0 octave/minute
Vibration (non-operating) 10G, 0-5kHz at 1.0 octave/minute
