
Cause: The ink cartridge(s) are not intended for use in this device.
Solution: Contact HP support. Go to:
www.hp.com/support
If prompted, choose your country/region, and then click Contact HP for information
on calling for technical support.
The following ink cartridges cannot be used after device initialization and must be
replaced
Cause: The wrong ink cartridge(s) are installed.
Solution: The indicated ink cartridge(s) cannot be used after the device has
undergone first-time setup. Replace the ink cartridge(s) with the appropriate ink
cartridges for the HP All-in-One. To find out the reorder number for all the ink
cartridges that the HP All-in-One supports, see the printed documentation that came
with the HP All-in-One.
For more information, see:
“
Replace the ink cartridges” on page 99
Cause: The ink cartridge(s) are not intended for use in this device.
Solution: Contact HP support. Go to:
www.hp.com/support
If prompted, choose your country/region, and then click Contact HP for information
on calling for technical support.
Ink cartridge problem
Cause: The indicated ink cartridge(s) are missing or are damaged.
Solution: Replace the indicated ink cartridge(s) immediately so that you can
resume printing. If there are no ink cartridges missing from the HP All-in-One, the ink
cartridge contacts might need to be cleaned.
If there are no ink cartridges missing from the HP All-in-One, and you still receive this
message after cleaning the ink cartridge contacts, you might have a damaged ink
cartridge. Check to see if your ink cartridge is still under warranty and the end of
warranty date has not been reached.
• If the end of warranty date has been reached, purchase a new ink cartridge.
• If the end of warranty date has not been reached, contact HP support. Go to
www.hp.com/support. If prompted, choose your country/region, and then click
Contact HP for information on calling for technical support.
For more information, see:
•“
Replace the ink cartridges” on page 99
•“
Clean the ink cartridge contacts” on page 104
Errors 163
Troubleshooting