Chapter 4—Load paper or transparency film, or load originals 9
HP PSC 700 Series
6 To prevent printed paper from possibly falling off the tray, fully extend the output-
tray extender.
5HYLHZWLSVIRUORDGLQJVSHFLILFW\SHVRISDSHU
The following table provides guidelines for loading certain types of paper and film. For
best results, adjust the paper settings each time you change paper types and paper sizes.
For more information, see “Set the paper type”.
Paper Tips
HP papers • HP Premium Inkjet paper: Locate the gray arrow on the
nonprinting side of the paper, and insert paper with the arrow
side facing up.
• HP Premium or Premium Plus Photo Paper: Load the glossy
(print) side down. Always load at least five sheets of regular
paper in the input tray first, and place the photo paper on top of
the regular paper.
• HP Premium Inkjet Transparency Film: Insert the film so that the
white transparency strip, with arrows and the HP logo, is on top
and is going into the tray first.
• HP Iron-On T-shirt Transfers: Flatten the transfer sheet
completely before using it; do not load curled sheets. (To prevent
curling, keep transfer sheets sealed in the original package until
just before using.) Manually feed one sheet at a time, with the
unprinted side facing down (the blue stripe faces up).
• HP Greeting Cards, Glossy Greeting Cards, or Textured Greeting
Cards: Insert a small stack of HP greeting-card paper with the
print-side down into the input tray until it stops.
• HP Restickable Inkjet Stickers: Place the sheets in the input tray,
print-side (sticker-side) down.
