12 2 Configuring the MBM for your work environment ENWW
Turning off the designated default output bin for copy jobs
If the MBM is connected to an MFP, the face-down bin 1 is designated for regular copy jobs in
the following operation modes:
● Stacker
● Job Separator
● Sorter/Collator
If the copy bin is turned off, regular copy jobs are sent to face-down bins 1 through 8 for the
Stacker, Job Separator, and Sorter/Collator modes.
Note This option does not apply to the Mailbox mode. When the Mailbox mode is used, the face-down
bin 1 is always used for copy jobs.
HP LaserJet 9040/9050 series printers
1 Use or to scroll to CONFIGURE DEVICE, and then press .
2 Use or to scroll to MBM-8 CONFIG, and then press .
3 Use or to scroll to COPIER BIN, and then press .
4 Use or to scroll to the option to turn the copy bin on or off, and then press .
HP LaserJet 9040mfp/9050mfp/9500mfp
1 Press the MENU button.
2 Scroll to and touch CONFIGURE DEVICE.
3 Scroll to and touch MBM-8 CONFIG.
4 Scroll to and touch COPIER BIN.
5 Scroll to the option to turn the copier bin on or off, and then touch OK.
